|
Tracks and accessories |
|||
|
002 - straight track, 15 cm - the 2nd through 5th track
show different printing underneath:
|
Straight track showing a hole in the middle - produced to serve the engine shed. Patent documents for the tracks, turning-frame and foldable rail are available on the Biller DVD |
||
|
|
|
||
|
old track-box - contents 12 straight track |
old track-box - contents 50 straight track |
||
|
|
|
|
|
|
the label of the 2nd Version track-box - contents 25 straight track |
the box and label of the 2nd Version track-box - contents 50 straight track | ||
|
quite interesting that on the 2nd Version boxes both parts are the same |
|||
|
|
 |
|
 |
|
002-5 - straight track, half seize, 8,5 cm the reinforcement tin either dark-grey or black |
003 - turning frame - the original and the model |
||
 |
|||
|
004 - bumper / support, height 24 mm 014 - support, height 38 mm, New in 1966 |
015 - support, height 45 mm 018 - support, height 65 mm, New in 1966 016 - support, height 88 mm |
||
|
original box for the support I - later 015 |
005 - shovel |
||
| 12 shovels in original box | |||
 |
 |
||
|
006 - road block |
all to me known road blocks show a 1 mm hole at the outer ends ... |
||
 |
 |
||
|
... through which a key ring could be inserted - to prevent the feet fall off. Additionally this here shown road block has buff painted feet - original, as stated by the owner. The price (-,50 DEM) indicates this one to be bought between 1949 and 1952. |
|||
 |
 |
||
 |
007 - foldable rail - inscription either both sides of the joints - or none | ||
 009 - curved track. Printings either Made in U.S. Zone Germany or Made in Western Germany onto only one side of the rail |
1st Version track-box - contents 12 curved track and Blister Set 6009 containing 6 rails |
||
|
|
|||
|
010 - right hand switch, and 011 - left hand switch - in different grey shades and original boxes for a pair each. And a blister Set Z4. |
|||
|
012 - turn table - underneath either coloured or blank |
024 - Rerailing ramp | Made by Fleischmann - but fits perfect for Biller | |
|
|
|
|
|
 |
 |
||
| blue turntable with yellow levers - I had some doubts - but it appears to be genuine. | who really would paint the levers afterwards in such a professional manner?? !! | ||
 |
019 - Wind-up key, for locos, excavators etc. Note: a different, smaller "fish boned" key available for the Race Cars and FIGURO. The smaller Biller key here is usually used for the base station at the 115 Helicopter, the 100 Trans World flyer or the 745 excavators - and fixed to them. This one was delivered together with the 050 Slugger Champs - and came back from Canada. | ||
|
|
020 little bag with coal and plastic tub and plastic SHELL Oil can |
||
|
|
|
|
|
|
021 - Road / level crossing - produced by FALLER - novelty 1965 |
and in a more modern counter display box |
The ancient Signal Box |
|
|
|
|
|
|
|
022 - straight track with signal, New in 1966, box containing 5 signals and blister set. |
|||
| generated: DEC-25-1999 | last update: 2011-MAR-20 | ||
